DVD Style’s output becomes PAL instead of NTSC even if you choose NTSC

When you make a DVD with DVD Styler, in some DVD players, you won’t get to see them.

If you’re on the PAL side, then there shouldn’t be nothing wrong with it, but if you live in the NTSC side, you might encounter into problems.

You often will get the error message of “This DVD is not NTSC”, “DVD is PAL” or something similar to it.

I know, you’ve made every possible settings as NTSC. I ran into the same problem. But unfortunately, DVD Styler has a bug that makes your DVD into PAL instead of NTSC.

Before you go on forward, some screenshots are in Japanese, but Media Player Classic and IfoEdit softwares are in English so you get the idea as its easy enough.


Analysis of what’s wrong.

  • When you try to play it on a DVD player, you get “Not an NTSC disc.” or its in PAL so you can’t play it bro”.

Confirming the symptoms

  • When you play it on Media Player Classic you can play the DVD.
  • In Media Player Classic, when you open the “VTS_01_0.IFO” file and look at the property in “MediaInfo” tab, its size is at 720×576 which is PAL and the format is also in PAL.
  • But when you open it in gspot and look at the VOB files, its in NTSC format and the size is in 720×480.

DVD Styler v2.2 & v2.2 rc 2 Bug No. 20

  • And ofcourse, all settings inside DVD styler has been set to NTSC.

Solutions

  • Using IfoEdit, rewrite the portion that says PAL to NTSC for “VIDEO_TS.IFO” and “VTS_01_0.IFO”.
  • After, burn it.
  • or just Upgrade to DVD Styler 2.3 which seems to have fixed this NTSC/PAL mixed problem.

Organizing the Symptoms

  • Trying to play it on the DVD player, it says “Cannot play because its not NTSC format” or “its in PAL format”.

    Cannot play because its not NTSC

Confirming the Symptoms

  • When you play it on Media Player Classic you can play the DVD.
  • In Media Player Classic, when you open the “VTS_01_0.IFO” file and look at the property in “MediaInfo” tab, its size is at 720×576 which is PAL and the format is also in PAL.

DVD Styler v2.2 & v2.2 rc 2 Bug No. 07
DVD Styler v2.2 & v2.2 rc 2 Bug No. 09

  • But when you open it in gspot and look at the VOB files, its in NTSC format and the size is in 720×480.
  • And ofcourse, all settings inside DVD styler has been set to NTSC.
DVD Styler v2.2 & v2.2 rc 2 Bug No. 16

There are three videos

DVD Styler v2.2 & v2.2 rc 2 Bug No. 17

You can see that the property in the menu is set to NTSC.

DVD Styler v2.2 & v2.2 rc 2 Bug No. 18

The video’s property is also set to NTSC.

DVD Styler v2.2 & v2.2 rc 2 Bug No. 19

The entire DVDs property is also set to NTSC. (The above prompt where it reads “ディスクラベル:DVDStylerでNTSCじゃなくてPALになってしまう!” means “Disk Label: DVDStyler outputs as PAL instead of NTSC!”

Solutions

  • Using IfoEdit, rewrite the portion that says PAL to NTSC for “VIDEO_TS.IFO” and “VTS_01_0.IFO”.

DVD Styler v2.2 & v2.2 rc 2 Bug No. 03
DVD Styler v2.2 & v2.2 rc 2 Bug No. 04DVD Styler v2.2 & v2.2 rc 2 Bug No. 05DVD Styler v2.2 & v2.2 rc 2 Bug No. 06DVD Styler v2.2 & v2.2 rc 2 Bug No. 12DVD Styler v2.2 & v2.2 rc 2 Bug No. 15

  • After, burn it on DVD.

  • IfoEdit http://www.ifoedit.com/ – I used IfoEdit 0.971
  • DVDStyler http://www.dvdstyler.org/ – Above was written using DVDStyler v2.2 and DVDStyler v2.2 rc 2.
スポンサーリンク
スポンサーリンク

フォローする

あ、気づきましたか?記事が少しでも役に立ったと思ったらシェアでもコメントでもしてみてください^^;
このページの短いURL: https://thejuraku.com/pc/?p=2091
80 queries in 0.915 seconds.